PLA

23,28 1kg/spool
Herz PLA

Herz PLA

The 3D print classic from biocompatible raw substances. High surface hardness, stiffness and high tensile strength, however just a moderate impact strength. Little to no warping. The heat deflection temperature is around 55 °C. PLA is the perfect starter filament and can be processed by any common 3D printer without a problem.
  • Processing temperature: 190-225 [°C] Printing bed temperature (if available): 50-60 [°C]
  • 1,75mm, 2,90mm
  • All items on offer are also available on 3kg, 5kg and 25kg spools. Additional colours on request.
  • white, black, yellow, signal red, transparent, silver, nato green, orange, green, blue, cherry red, light green, pink
81,78 1kg/spool
Herz PLA-HT

Herz PLA-HT

PLA-HT filament is a further development of the PLA filament. PLA-HT filament combines the strengths of other materials with the simple printability of PLA. In this way, PLA-HT is more impact-resistant and more temperature-stable than the traditional PLA filament. PLA-HT unleashes its full power with post-curing. Then, the impact strength increases to up to 15 times the impact strength of normal PLA or 2.2x as strong as ABS. The temperature resistance also increases after the tempering process to approx. 100 °C. Thanks to these excellent properties, PLA-HT is also well suited to mechanical components.
  • Processing temperature: 190- 225 [°C] Printing bed temperature (if available): 50- 60 [°C]
  • 1,75mm, 2,90mm
  • All items on offer are also available on 3kg, 5kg and 25kg spools. Additional colours on request.
  • natural
45,63 0,75kg/spool
Herz PLA-HI

Herz PLA-HI

CREAMELT® PLA-HI is a bio-based 3D printing filament with high impact resistance. It consists of PLA that has been additionally modified with additives to make it significantly more impact resistant than many other PLA filaments available on the market. CREAMELT® PLA-HI can be used to produce high-precision objects with good surfaces and excellent impact resistance.
  • Processing temperature: 200-220 [°C] Printing bed temperature: 50-60 [°C]
  • 1,75mm, 2,85mm
  • white, black, natural, grey, sky blue, green, neon green, yellow, orange, red